Codabar Require Margins Enter/Exit Programming Mode
Product Reference Guide
229
Codabar Require Margins
Enables/disables the requirement that quiet zones be present in a Codabar bar
code.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Codabar Require Margins = Quiet Zones Not Required
Codabar Require Margins = Quiet Zones Required
To Next Page
Loading...
