Enter/Exit Programming Mode Digital Watermark (DWM) Features
14 Magellan™ 3450VSi
Digital Watermark (DWM) Features
Digital Watermark (DWM) Enable
Enables/Disables the ability of the scanner to decode Digital Watermarks.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
Digital Watermark (DWM) = Disable
Digital Watermark (DWM) = Enable
The Digital Watermark feature must be enabled for decode
functionality.
To Next Page
Loading...
