Enter/Exit Programming Mode Code 93 Length 1
234 Magellan™ 3450VSi
Code 93 Length 1
If Code 93 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 93 first fixed length. If Code 93 Length Control is set to Variable-
Le
ngth decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the bar code, Set Code 93 Length 1 on page 234 below. You’ll need
to cover any unused bar codes on this and the facing pag
e to ensure that
the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 01 to 50. Pad all single digit numbers with a leading zero to yield
a two-digit entry (01-50).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Set Code 93 Length 1
DEFAULT
Default setting for this feature = 01
To Next Page
Loading...
