Enter/Exit Programming Mode MSI
238 Magellan™ 3450VSi
MSI Check Character Calculation
Enables/disables calculation and verification of optional MSI check characters.
NOTE
If check character calculation is disabled, the risk is increased that
a m
isread can occur. When disabled, any check characters in a bar
code are treated as data characters.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
MSI Check Character Calculation = Disable
MSI Check Character Calculation = Enable
To Next Page
Loading...
