Enter/Exit Programming Mode MSI Check Character Transmission
240 Magellan™ 3450VSi
MSI Check Character Transmission
Enables/disables transmission of optional MSI check characters.
NOTE
This feature applies only when
MSI Check Character Calcu-
lation on page 238
is enabled. This item is ignored when the
advanced feature, Full L
abel Edit, is enabled.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
MSI Check Character Transmission = Disable
MSI Check Character Transmission = Enable
To Next Page
Loading...
