Enter/Exit Programming Mode MSI Length 1
244 Magellan™ 3450VSi
MSI Length 1
If MSI Length Control is set to Fixed-Length decoding, this feature specifies MSI
first fixed length. If MSI Length Control is set to Variable-Length decoding, this
feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code, Set MSI Length 1 on page 244 below. You’ll need to
cover any unused bar codes on this and the f
acing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 4 to 16. Pad all single digit numbers with a leading zero to yield a
two-digit entry (04-16).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Set MSI Length 1
DEFAULT
Default setting for this feature = 04
To Next Page
Loading...
