Product Reference Guide 257
2D Symbologies/Bar Codes
2D Codes
NOTE
If the scanner’s interface type must
be changed, always be sure that
interface configuration is the FIRST item scanned during a program-
ming session. (Selecting an interface
type resets ALL other configura-
tion items — including symbology
programming — to the factory
default for that interface type.)
The following pages contain configuration information concerning the various
2D bar code types the scanner supports.
DATA MATRIX starting on page 258
starting on page 262
MICRO PDF 417 starting on page 266
QR CODE starting on page 270
MICRO QR CODE starting on page 275
AZTEC CODE starting on page 278
PDF 417
To Next Page
Loading...
