Datalogic Magellan 3450VSi - Data Matrix; Data Matrix Enable

Enter/Exit Programming Mode Data Matrix Enable
258 Magellan™ 3450VSi
Data Matrix
Data Matrix Enable
Enables/disables the ability of the scanner to decode Data Matrix labels.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
010000(CR)
Data Matrix = Disable
010001(CR)
Data Matrix = Enable