Enter/Exit Programming Mode PDF 417 Length Control
264
Magellan™ 3450VSi
PDF 417 Length 1, Length 2 Programming Instructions
If PDF417 Length Control is set to Fixed-Length decoding, this feature specifies
PDF417 first fixed length. If PDF417 Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
NOTE
This tag is only valid for units with a model id that supports
PDF.
Length 1 is the minimum label len
gth if in variable length
mode, or the first fixed length if in fixed length mode. Length 2
is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode. Length includes
the bar code's data characters only. Any value > 2710 will be
considered to be 2710.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the bar code, Set PDF 417 Length 1 on page 264 or Set PDF 417
Length 2 on page 264 below. You’ll need to cover any
unused bar codes
on this and the facing page to ensure that the scanner reads only the bar
co
de you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 0001 to 2710. Pad all numbers with leading zeros to yield a four-
digit entry (0001-2710).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Default setting for this feature = 0001
Set PDF 417 Length 1
Set PDF 417 Length 2
Default setting for this feature = 0A96
To Next Page
Loading...
