Enter/Exit Programming Mode Micro PDF 417 Length Control
268
Magellan™ 3450VSi
Micro PDF 417 Length 1, Length 2 Programming Instructions
If Micro PDF 417 Length Control is set to Fixed-Length decoding, this feature
specifies Micro PDF 417 first fixed length. If Micro PDF 417 Length Control is
set to Variable-Length decoding, this feature specifies the minimum label
length.
NOTE
This tag is only valid for units with a model ID that supports
PDF.
Length 1 is the minimum label len
gth if in variable length
mode, or the first fixed length if in fixed length mode. Length 2
is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode. Length includes
the bar code's data characters only. Any value > 0366 will be
considered to be 0366.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the bar code, Set Micro PDF 417 Length 1 on page 268 or Set Micro
PDF 417 Length 2 on page 268 below. You’ll need to cover any unused bar
codes on this and the facing page to ensure that the scanner reads only
the
bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 0001 to 0366. Pad all numbers with leading zeros to yield a four-
digit entry (0001-0366).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Default setting for this feature = 0001
Set Micro PDF 417 Length 1
Set Micro PDF 417 Length 2
Default setting for this feature = 016E
To Next Page
Loading...
