QR Code URL Link Enable Enter/Exit Programming Mode
Product Reference Guide
273
QR Code URL Link Enable
Enables/Disables the decoding of QR codes with a URL link on imagers other
than the optional Customer Service Scanner (CSS).
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
QR Code URL Link = Disable
QR Code URL Link = Enable
To Next Page
Loading...
