Datalogic Magellan 3450VSi - Appendix A Product Specifications; Decoding Capability; Electrical

Micro QR Code Enable Enter/Exit Programming Mode
Product Reference Guide 275
Micro QR Code
Micro QR Code Enable
Enables/disables the ability of the scanner to decode Micro QRCode labels.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
042800(CR)
Micro QR Code = Disable
042801(CR)
Micro QR Code = Enable