Datalogic Magellan 3450VSi - Environmental

Enter/Exit Programming Mode Micro QR Code Length Control
276 Magellan™ 3450VSi
Micro QR Code Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a ar code if the label length falls in the range of the configurable
m
inimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the Fixed Length
Decoding bar code.
3. Scan the ENTER/EXIT Prog
ramming Mode bar code.
4. Set Length 1 to the first fixed length using the Micro QR Code Length 1,
Length 2 Programming Instructions on page 277 that follow this page.
5. Set Length 2 to the second fixed length (or t
o ‘0000’ if there is only one
fixed length) using the Micro QR Code Length 1, Le
ngth 2 Programming
Instructions on page 277.
Configuring Variable Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding
bar code.
3. Scan the ENTER/EXIT Prog
ramming Mode bar code.
4. Set Length 1 to the minimum length using the Micro QR Code Length 1,
Length 2 Programming Instructions on page 277 that follow this page.
5. Set Length 2 to the maximum length using the Micro QR Code Length 1,
Length 2 Programming Instructions on page 277.
DEFAULT
042A00(CR)
Micro QR Code Length Control = Variable Length
042A01(CR)
Micro QR Code Length Control = Fixed Length