Label ID
284 Magellan™ 3450VSi
Length 1, Length 2 Programming Instructions
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code for the desired sym-
bology.
3. Turn to Appendix C and scan the two digits (zero padded) representing
the length in decimal notation. The number of characters that can be set
varies, depending upon the symbology. Reference the page for your
selected symbology to see specific variables.
4. Scan the Enter/Exit Programming Mode bar code
To Next Page
Loading...
