Product Reference Guide 325
Appendix H
microSD Card
microSDHC Compatibility
At the time of this writing, the microSD card interface for this product supports
SD-Memory Card Specifications/ Part 1. Physical Layer Specification; Version
1.01, but the processor MCI can communicate with SDHC Cards. For example,
the scanner can perform the functions specified in this appendix for the SDA
2.0 specification. Both FAT16 and FAT32 formats are supported.
Filenames are limited to the 8.3 file naming format (i.e., FILENAME.EXT), and
MUST be capitalized.
microSD Card Insertion
1. Read all of these instructions before starting.
2. If you have not already done so, remov
e the scanner from its installed
position to allow access to the microSD card slot.
3. Separate the scanner from its back cover.
4. Ensure there are no other cables attached to the scanner, then apply power
and wait f
or the reset beep.
5. Lift and rotate the rubber
co
ver to access the card
slot, then carefully insert
the microSD card into the
slot until it "clicks" into
place.
Scanner
microSD Card
Push down past
ush to seat,
then carefully
release
Seated card
To Next Page
Loading...
