From Scanner to microSD Card
Product Reference Guide 327
microSD Function Summary
The following table summarizes various functions of microSD card. Contact
tech support regarding upgrade license for new features.
FUNCTION
Image
Capture
Export
Status
Export
Configuration
Load
App
lic
Load
Config
Load
CPLD
Code
a
Feature
Upgrade
b
Direction
Scanner ⇒ microSD
Card
√ √ √
microSD Card ⇒
Scanner
√ √ √ √
Initiated by
Scanning a label
√ √
AUTORUN.DLS file
in microSD card
√ √
√
c
c. Can be initiated by scanning a label
√ √ √
microSD Function Details
From Scanner to microSD Card
Capture and save an image to a microSD card by scanning a label.
1. Insert the microSD card into the scanner.
2. Scan the Capture Label. The scanner enters image capture mode.
3. Place the item to be captured in front of the scanner.
Press and release the Camera Button. The sc
anner will automatically cap-
ture and save the image to the microSD card.
4. Upon scanner audio indication of completion, an image is saved to the
microS
D card.
NOTE
The image file name range is from IMAGE000 to IMAGE999. if the
same name already exists in the microSD card, the scanner skips that
name and uses the next. For example, if IMAGE000.JPG is already used
in the microSD card, the scanner uses IMAGE001.JPG. The time stamp
is not real, since scanner does not have a real time clock.
Image format (.BMP, .JPG), image siz
e (VGA, WVGA, Full size), Bright-
ness (0~9), contrast (0~9), and JPG compression ratio (0~100) are
defined in
configuration.
a. The only way to load CPLD code (i.e., FPGA code) is to load a new application package.
b. The only way to do a feature upgrade is to load a new application package.
To Next Page
Loading...
