AIM Formats
Product Reference Guide 337
• Prefix must be ASCII characters ']E2'.
• Length of supplemental data
including prefix must be 8. Total required
length is 24 for EAN-13 and 19 for EAN-8.
• Examples: add-on port
ion is highlighted data is underlined.
UPC-A 5-Dgit add-on
']E00060992011187
]E212345
'
UPC-E 5-Digit add-on
']E00000000998875
]E212345
'
EAN-8 5-Digit add-on
']E400210126
]E212345
'
EAN-13 5-Digit add-on
']E01101234567891
]E212345
'
Bookland
• The 'Bookland' / ISBN code will be formatted as a vendor specific AIM label.
• Prefix must be ASCII characters ']X0'.
• length of label data including prefix is 13.
• Examples: ']X01234567890'.
Code 39
• Check character must be included in label data.
• Label length including start, stop and check characters and excluding pre-
fix characters must meet requirements imposed by the main scanner's
fixed o
r variable label length control for this symbology type.
• Start and stop characters "*" must be included in label.
•Prefix must be ASCII characters ']A0' or
']A1'.
• Example: '*]A0Code 39.TEST*'.
Codabar
• Check character must be included in label data.
• Label length including check character and excluding prefix characters
mu
st meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be ASCII characters ']F0'.
• Start stop character sets must meet the matching requirement set forth by
th
e scanner configuration item
Start/Stop Character Match.
• Start stop character sets s must be of the form
ABCD/ABCD and must be
included in the label.
• Example: ']F0s$99.95s' (the lo
wer case ‘s’ at each end of the example is a
placeholder for the start stop character set).
MSI
• Check character must be included in label data.
• Label length including check character and excluding prefix characters
mu
st meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be ASCII characters ']M0'.
• Example: ']M0144769254'.