Datalogic Magellan 3450VSi - Good Read Beep Frequency

Good Read Beep Frequency Enter/Exit Programming Mode
Product Reference Guide 29
Good Read Beep Frequency
Adjusts the scanner’s good read beep to sound at low, medium, or high fre-
quency (controls the beeper’s pitch/tone).
•Low
•Medium
•High
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
001400(CR)
Good Read Beep Frequency = Low
001401(CR)
Good Read Beep Frequency = Medium
DEFAULT
001402(CR)
Good Read Beep Frequency = High