Host Download to Handheld Enter/Exit Programming Mode
Product Reference Guide 33
Host Download to Handheld
Attached Datalogic handheld scanners can be updated via the host port. Con-
tact Technical Support for details.
Handheld Host Download Timeout
This feature sets the timeout (in seconds) to wait for a response from the hand-
held when performing a host download to the handheld.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan the bar code below, Set Handheld HDL Timeout. You’ll need to cover
a
ny unused bar codes on this and the facing page to ensure that the scan-
ner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypad in Appendix C
that represent the desired del
ay. The selectable range is 0-255, which is
the delay in 1-second increments. Pad all single and double digit numbers
with leading zeroes to yield a three-digit entry (000-255).
4. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
Examples:
002 = 2 seconds
005 = 5 seconds
015 = 15 seconds
Set Handheld HDL Timeout
DEFAULT
Default setting for this feature is: 15 seconds
To Next Page
Loading...
