Datalogic Magellan 3450VSi - Cell Mode Percent

Imaging Features Enter/Exit Programming Mode
Product Reference Guide 41
Cell Mode Percent
Specifies the rate of frames dedicated to reading cell phones. Cell reading fea-
ture must be enabled for this to
be active. The setting reflects a variable setting
(or percentage) of frames dedicated to cell reading
NOTE
DEFAULT
047100(CR)
Cell Mode Percent = 2.5% (Very Low)
047101\r
Cell Mode Percent = 5% (Low)
047102\r
Cell Mode Percent = 10% (Medium)
047103\r
Cell Mode Percent = 20% (Medium High)
047104\r
Cell Mode Percent = 50% (High)
As the percentage is increased, object sense (if enabled) will
become less responsive. Anything above 10% will have a negative
impact on scanning performance.