Datalogic Magellan 3450VSi - USB Interface Selection

Enter/Exit Programming Mode USB Interface Selection
58 Magellan™ 3450VSi
USB Interface Selection
Remember to cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
CAUTION
NOTE
000145(CR)
Interface Type = USB OEM
00010D(CR)
Interface Type = USB TEC
000147(CR)
Interface Type = USB COM
Single cable installations require connection at the POS Termi-
nal (host) port.
Great care should be taken to select the correct interface type,
sinc
e you can cause damage to the scanner and/or POS termi-
nal by attempting to change t
o an incompatible interface.
ALWAYS make interface selections with the host cable DIS-
CONNECTED.