Enter/Exit Programming Mode RS-232 Beep on ASCII BEL
68 Magellan™ 3450VSi
RS-232 Beep on ASCII BEL
Enables/disables ability of scanner to beep (sound a good read tone) on receiv-
ing an ASCII BEL (07 hex).
DEFAULT
RS-232 Beep on ASCII BEL = Disable
RS-232 Beep on ASCII BEL = Enable
Beep on Not on File
Select for the host to beep (or not) when a not-on-file condition is detected by
the host. This feature is also applicable to single cable RS-232..
RS-232 Beep on Not on File = Muted
RS-232 Beep on Not on File = Low Volume
RS-232 Beep on Not on File = Medium Volume
RS-232 Beep on Not on File = High Volume