Enter/Exit Programming Mode USB OEM Scanner Device Type
86 Magellan™ 3450VSi
USB-OEM Interface Features
USB OEM Scanner Device Type
The OEM-USB protocol allows for the scanner to be identified as one of two dif-
ferent types of bar code scanners. Depending on what other scanners you may
a
lready have connected to a USB POS, you may need to change this setting to
enable all scanners to communicate. Options are:
• Table Top Scanner
• Handheld Scanner
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
USB OEM Scanner Device Type = Table Top Scanner
USB OEM Scanner Device Type = Handheld Scanner
To Next Page
Loading...
