Datalogic Magellan 3450VSi - USB OEM Additional Interface Options

USB-OEM Interface Features Enter/Exit Programming Mode
Product Reference Guide 87
USB OEM Additional Interface Options
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
Complete the programming sequence by sca
nning the Enter/Exit Programming
Mode bar code
055101(CR)
USB OEM Interfaces Option2 =
Enable scanner at first enumeration after BusReset
055100(CR)
USB OEM Interfaces Option2 =
Disable scanner at first enumeration after BusReset
DEFAULT