Datalogic MAGELLAN 900i - Symbology Programming; 1 D Symbologies

PRODUCT REFERENCE GUIDE 101
CONFIGURATION | 1D SYMBOLOGY
PROGRAMMING
1D SYMBOLOGIES
The following pages contain configuration information concerning the various barcode
types (symbologies) the scanner supports.
NOTE
If the scanner’s interface type must be changed, always be sure that interface configuration is
the FIRST item scanned during a programming session. (Selecting an interface type resets ALL
other configuration items — including symbology programming — to the factory default for that
interface type.)
SECTION CONTENTS
COUPON CONTROL starting on page 102 CODE 93 starting on page 208
UPC-A starting on page 105 MSI starting on page 213
UPC-E starting on page 110 STANDARD 2 OF 5 starting on page 221
EAN-13 starting on page 116 IATA starting on page 229
EAN-8 starting on page 121 PLESSEY starting on page 231
OTHER UPC/EAN OPTIONS starting on page
130
ANKER PLESSEY starting on page 236
GTIN starting on page 151 CODE 39 CIP starting on page 238
GS1 DATABAR starting on page 152 TRIOPTIC starting on page 240
DATABAR OMNIDIRECTIONAL starting on page
152
CODE39 PZN starting on page 241
DATABAR LIMITED starting on page 157 CODE128 ISBT starting on page 245
DATABAR EXPANDED starting on page 161 I25 CIP HR starting on page 246
CODE 39 starting on page 169 I25 FOLLETT starting on page 248
CODE 32 ITALIAN PHARMACODE starting on
page 178
CODE 128 starting on page 181
EAN-128 starting on page 189
INTERLEAVED 2 OF 5 (I 2 OF 5) starting on
page 190
CODABAR starting on page 197