EAN-13 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
119
EAN-13 ISBN Conversion Enable
Enables/disables conversion of EAN/JAN-13 labels starting with 978 to Bookland ISBN
labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
EAN-13 ISBN Conversion = Disable
EAN-13 ISBN Conversion = Enable
DEFAULT
02AA00(CR)
02AA01(CR)
To Next Page
Loading...
