EAN-8 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
123
Expand EAN-8 to EAN-13
Enables/disables expansion of EAN/JAN-8 labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
Expand EAN-8 to EAN-13 = Disable
Expand EAN-8 to EAN-13 = Enable
DEFAULT
021B00(CR)
021B01(CR)
To Next Page
Loading...
