OTHER UPC/EAN OPTIONS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
143
Add-ons
The scanner is capable of processing different types of add-on codes, including:
• 2-Digit Supplemental
• 5-Digit Supplemental
Options are provided on the following pages for your convenience:
• Disable all add-ons — The scanner will not look for or read add-ons.
• Optional 2-Digit and 5-Digit Supplemental — Barcodes can be read which include 2-
Digit or 5-Digit Supplementals, however, it is not required that add-ons be included in
barcodes.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode representing the desired option on this and the following page.
You’ll need to cover any unused barcodes on facing pages to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
NOTE
Contact customer support for advanced programming of optional
and conditional add-ons.
Add-ons = Disable All Add-ons
Add-ons = Optional 2-Digit and 5-Digit Supplemental
DEFAULT
051000(CR)051100(CR)
051001(CR)051101(CR)
To Next Page
Loading...
