DATABAR EXPANDED ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
161
DATABAR EXPANDED
DataBar Expanded Enable
Enables/disables the ability of the scanner to decode DataBar Expanded labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
NOTE
This value-added feature is a factory-programmed option. Con-
tact your dealer for information about upgrading your system to
include this advanced capability.
DataBar Expanded = Disable
DataBar Expanded = Enable
DEFAULT
04D100(CR)
04D101(CR)
To Next Page
Loading...
