Datalogic MAGELLAN 900i - Databar Expanded EAN-128 Emulation

ENTER/EXIT PROGRAMMING MODE
162 MAGELLAN™ 900I
DataBar Expanded EAN-128 Emulation
Enables/disables EAN 128 emulation for DataBar Expanded.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
DataBar Expanded EAN-128 Emulation = Disable
DataBar Expanded EAN-128 Emulation = Enable
DEFAULT
04D500(CR)
04D501(CR)