ENTER/EXIT PROGRAMMING MODE
166
MAGELLAN™ 900I
DataBar Expanded Length 1
Length 1 is the minimum label length if in variable length mode, or the first fixed length if in
fixed length mode. Length includes the barcode's data characters only.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
Set DataBar Expanded Length 1 on page 166 below. You’ll need to
cover any unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
Alpha-Numeric Keypad in Appendix C that repre-
sent the desired label length. The selectable range for this option is 00 to 74. Pad all
single digit numbers with a leading zero to yield a two-digit entry (00-74).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
Set DataBar Expanded Length 1
Default setting for this feature = 01
04BE(CR)
DEFAULT
To Next Page
Loading...
