HANDHELD SCANNING MODE
PRODUCT REFERENCE GUIDE
7
HOW TO SCAN
Barcodes can be presented to the scanner while it is resting on the stand, or the scanner
can be picked up for targeted scanning.
Figure 6. Scanning Methods
Handheld Scanning Mode
To read a barcode using Handheld Scanning Mode:
1. Pick up the scanner and click the button - the aimer LED will illuminate.
2. With the aimer over the barcode to be read, press the button.
Upon a successful read, the lights beside the button will blink bright green and the Green-
Spot™ will illuminate, highlighting the decoded barcode.
See
Handheld State On Time for programming labels for this feature.
Center Zone Qualification
The configurable Center Zone can be set to limit the scan area to allow Targeted Scanning of
pick lists or other special items. Barcodes will read in any orientation. The scanner will
return to full pattern Presentation Mode when set back down, after a configurable time has
elapsed.
See
Center Zone Enable to set this feature.
Scan Button
PRESENTATION MODE
HANDHELD MODE
Good Read Indicator Good Read Indicator
To Next Page
Loading...
