CODE 128 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
183
Expand Code128 to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
Expand Code128 to Code 39 = Disable
Expand Code128 to Code 39 = Enable
DEFAULT
069600(CR)
069601(CR)
To Next Page
Loading...
