EAN-128 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
189
EAN-128
EAN-128 Enable
Enables/disables the ability of the scanner to translate EAN128 labels to the EAN128 data
format.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
EAN-128 = Transmit EAN128 labels in Code128 data
format
EAN-128 = Transmit EAN128 labels in EAN128 data for-
mat
DEFAULT
02D800(CR)
02D801(CR)
To Next Page
Loading...
