INTERLEAVED 2 OF 5 (I 2 OF 5) ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
193
I 2 of 5 Minimum Read
This feature specifies the minimum number of consecutive I 2 of 5 decodes before is
accepted as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
I 2 of 5 Minimum Read = 1
I 2 of 5 Minimum Read = 2
I 2 of 5 Minimum Read = 3
I 2 of 5 Minimum Read = 4
DEFAULT
006D01(CR)
006D02(CR)
006D03(CR)
006D04(CR)
To Next Page
Loading...
