CODABAR ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
207
Codabar Require Margins
Enables/disables the requirement that quiet zones be present in a Codabar barcode.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
Codabar Require Margins = Quiet Zones Not Required
Codabar Require Margins = Quiet Zones Required
DEFAULT
068D00(CR)
068D01(CR)
To Next Page
Loading...
