CODE 93 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
209
Code 93 Minimum Read
This feature specifies the minimum number of consecutive Code 93 decodes before is
accepted as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
Code 93 Minimum Read = 1
Code 93 Minimum Read = 2
Code 93 Minimum Read = 3
Code 93 Minimum Read = 4
DEFAULT
006E01(CR)
006E02(CR)
006E03(CR)
006E04(CR)
To Next Page
Loading...
