MSI ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
217
MSI Minimum Read
This feature specifies the minimum number of consecutive MSI decodes before is accepted
as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
MSI Minimum Read = 1
MSI Minimum Read = 2
MSI Minimum Read = 3
MSI Minimum Read = 4
DEFAULT
00BF01(CR)
00BF02(CR)
00BF03(CR)
00BF04(CR)
To Next Page
Loading...
