Datalogic MAGELLAN 900i - Standard 2 of 5 Minimum Read

ENTER/EXIT PROGRAMMING MODE
224 MAGELLAN™ 900I
Standard 2 of 5 Minimum Read
This feature specifies the minimum number of consecutive Standard 2 of 5 decodes before
is accepted as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
Standard 2 of 5 Minimum Read = 1
Standard 2 of 5 Minimum Read = 2
Standard 2 of 5 Minimum Read = 3
Standard 2 of 5 Minimum Read = 4
DEFAULT
049501(CR)
049502(CR)
049503(CR)
049504(CR)