PDF 417 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
257
PDF 417 Read Option
This feature specifies an additional read control option for PDF 417 barcodes.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
PDF 417 Read Option = None
PDF 417 Read Option = Turn Off Codeword
Length Checking
DEFAULT
05A400(CR)
05A401(CR)
To Next Page
Loading...
