ENTER/EXIT PROGRAMMING MODE
258
MAGELLAN™ 900I
MICRO PDF 417
Micro PDF 417 Enable
Enables/disables the ability of the scanner to decode Micro PDF 417 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
Micro PDF 417 = Disable
Micro PDF 417 = Enable
DEFAULT
034E00(CR)
034E01(CR)
To Next Page
Loading...
