IMB ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
289
IMB
IMB Enable
Enables/disables the ability of the scanner to decode IMB labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
IMB = Disable
IMB = Enable
DEFAULT
052700(CR)
052701(CR)
To Next Page
Loading...
