ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
19
Double Read Table Size
Specifies the number of labels to be tracked if double read protection is needed. Contact
Technical Support for more information.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode
Set Double Read Table Size below. You’ll need to cover any unused
barcodes on this and the facing page to ensure that the scanner reads only the bar-
code you intend to scan.
3. Scan the appropriate digits from the
Alpha-Numeric Keypad in Appendix C that repre-
sent the desired number of entries, using hex values. The selectable range is 01-25.
Pad all numbers with leading zeros to yield a two-digit entry.
4. Scan the Enter/Exit Programming Mode barcode at the top of the page to exit Pro-
gramming Mode.
Set Double Read Table Size
Default setting for this feature is: 7 Entries
1505(CR)
DEFAULT
To Next Page
Loading...
