Datalogic MAGELLAN 900i - Interface Related Features

52 MAGELLAN™ 900I
CONFIGURATION | INTERFACE RELATED
FEATURES
SECTION CONTENTS
INTERFACE SELECTION starting on page 53
USB Interface Selection on page 54
RS-232 Interface Selection on page 55
USB INTERFACE FEATURES starting on page 57
•Ignore Host Commands on page 56
•USB-COM Interface Setup on page 57
•
USB KEYBOARD FEATURES starting on page 58
•Keyboard Layout on page 58
•USB Keyboard Country Mode on page 58
•USB Keyboard Intercharacter Delay on page 61
•USB Keyboard - ALT Mode Type on page 62
•USB Keyboard - ALT Mode Only on page 63
•USB Keyboard - Use NUMPAD on page 63
•USB Keyboard - Control Mode on page 64
USB-OEM FEATURES starting on page 65
•USB OEM Scanner Device Type on page 65
RS-232 INTERFACE FEATURES starting on page 66
•RS-232 Baud Rate on page 66
•RS-232 Number of Data Bits on page 68
•RS-232 Number of Stop Bits on page 68
•RS-232 Parity on page 69
•RS-232 Hardware Control on page 70
•RS-232 Software Flow Control on page 71
•RS-232 Beep on ASCII BEL on page 72
•Beep on Not on File on page 72
•RS-232 ACK NAK Features on page 73
- ACK NAK Enable on page 73
- RS-232 ACK Character on page 74
- RS-232 NAK Character on page 75
- RS-232 Retry on ACK NAK Timeout on page 76
- RS-232 ACK NAK Timeout Value on page 77
- RS-232 ACK NAK Retry Count on page 78
- RS-232 ACK NAK Error Handling on page 79
•RS-232 Indicate Transmission Failure on page 80