ENTER/EXIT PROGRAMMING MODE
54
MAGELLAN™ 900I
USB Interface Selection
Remember to cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
CAUTION
Great care should be taken to select the correct interface type, since you
can cause damage to the scanner and/or POS terminal by attempting to
change to an incompatible interface. ALWAYS make interface selections
with the host cable DISCONNECTED.
Interface Type = USB OEM
Interface Type = USB COM
Interface Type = USB Keyboard
000145(CR)
000147(CR)
000135(CR)
To Next Page
Loading...
