USB INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
57
USB INTERFACE FEATURES
USB-COM Interface Setup
The Datalogic USB-COM driver is required to use USB-COM or USB-COM DL interfaces. The
Datalogic USB-COM driver can be downloaded from the Datalogic website.
Before plugging your scanner into the Host PC, please ensure you have already copied the
executable DLS USB-COM driver file to your PC and that the scanner’s interface is set to USB
COM or USB COM DL.
1. Execute the DLS USB-COM driver file.
2. When the scanner is first plugged into the PC, Windows will bring up the “Found New
Hardware” message.
3. The installation is complete.
To Next Page
Loading...
