Datalogic MAGELLAN 900i - USB Keyboard - ALT Mode Only; USB Keyboard - Use NUMPAD

USB INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 63
USB Keyboard - ALT Mode Only
Enables sending all characters using Alt codes.
Disable: Scanner will attempt to transmit character with a scancode. If no scancode is
present in the current country mode for the character, the scanner transmits the character
with an ALT code.
Enable: Scanner always transmits characters as ALT codes regardless of configured country
mode.
USB Keyboard - Use NUMPAD
Enables use of NUMPAD instead of number row.
Disable: Scanner will transmit numbers with the keyboard's number row keys.
Enable: Scanner will transmit numbers with the keyboard's numpad keys
ALT Mode Only = Disable
ALT Mode Only = Enable
DEFAULT
05D300(CR)
05D301(CR)
Use Numpad = Disable
Use Numpad= Enable
DEFAULT
05D400(CR)
05D401(CR)