USB INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
65
USB-OEM Features
USB OEM Scanner Device Type
The OEM-USB protocol allows for the scanner to be identified as one of two different types
of barcode scanners. Depending on what other scanners you may already have connected
to a USB POS, you may need to change this setting to enable all scanners to communicate.
Options are:
• Table Top Scanner
• Handheld Scanner
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
USB OEM Scanner Device Type = Table Top Scanner
USB OEM Scanner Device Type = Handheld Scanner
DEFAULT
050D00(CR)
050D01(CR)
To Next Page
Loading...
