Datalogic MAGELLAN 900i - Parity

RS-232 INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 69
RS-232 Parity
Specifies parity required for sending and receiving data.
Options for this setting are:
• RS-232 PARITY = NONE
• RS-232 PARITY = EVEN
• RS-232 PARITY = ODD.
NOTE
A setting of no parity with 7 data bits will default to 8 data bits and no
parity.
RS-232 Parity = None
RS-232 Parity = Even
RS-232 Parity = Odd
DEFAULT
001F00(CR)
001F01(CR)
001F02(CR)