Datalogic MAGELLAN 900i - Beep on ASCII BEL; Beep on Not on File

ENTER/EXIT PROGRAMMING MODE
72 MAGELLAN™ 900I
RS-232 Beep on ASCII BEL
Enables/disables ability of scanner to beep (sound a good read tone) on receiving an ASCII
BEL (07 hex).
Beep on Not on File
Select for the host to beep (or not) when a not-on-file condition is detected by the host.
RS-232 Beep on ASCII BEL = Disable
RS-232 Beep on ASCII BEL = Enable
DEFAULT
069D00(CR)
069D01(CR)
RS-232 Beep on Not on File = Muted
RS-232 Beep on Not on File = Low Volume
RS-232 Beep on Not on File = Medium Volume
RS-232 Beep on Not on File = High Volume
045100(CR)
045101(CR)
DEFAULT
045102(CR)
045103(CR)